We often think that using the right cleaning products will keep our pool in perfect condition. And that’s true, but excessive or incorrect use of these products can often cause different types of stains , such as the one we’re going to discuss today: whitish stains on the walls and bottom of the pool.
As with everything, there’s a reason and a solution. In this case , the most common cause is the buildup of limescale deposits , so we’re going to explain, step by step, how to get rid of those stains and get your pool back in perfect condition.
How are we going to solve this?
-
We lowered the pH to 6.5 with PH – ACID POOL REINDESA
-
We perform an anti-limescale treatment: 1 liter per 10m3 of ANTI CAL REINDESA
-
We cleaned the walls and bottom of the pool to get rid of the stains that had already formed.
-
We left the filtration system running for 24 hours.
-
We increase the pH to 7.2 with PH + SODIC POOL REINDESA
-
Finally, we checked the water balance (TAC, TH and pH)
This should completely remove the whitish stains on the walls and background. However, if the treatment is ineffective, it means the stains are deeply ingrained, so we should try again as follows:
-
We emptied the pool to clean it properly with DESINCRUS REIN
-
We filled the pool while performing a water quality test (TAC, TH and pH)
-
And finally, we will use ANTICAL REINDESA as a preventative measure
And that’s it! It might seem like a tedious solution, but with a little dedication, we’ll have our pool working perfectly again, free of any whitish stains on the walls or bottom. And don’t forget, if you need help, you can contact your nearest Reindesa store and we’ll be happy to assist you personally.
